Recently, I was making these garden dish flowers and I wanted to use cooper tubing for the stems. (A tutorial on how to make the dish flower is at the end of this article.
The cooper tubing was too long so I needed some sort of tool to cut it but did not want to spend a lot of money. I found this HDX Junior Tube Cutter. This cutter will cut copper and PVC tubing from 1/8” to 5/8” in diameter. It was the perfect tool for the job.
To learn how to use the cutter, watch this video and read on.
Disclaimer: This post may contain affiliate links. Please see our full Affiliate
Statement for more information.
The HDX Junior Tube Cutter has a knob for opening the cutter jaw and cutting wheel to cut the tubing.
It is simple to use:
1. Just turn the knob to open the cutting jaw.
2. Line up cutting wheel on the tubing wherever you want to cut.
3. Tighten the cutting wheel with the knob.
4. Rotate the cutter around the tubing, tightening the knob every few turns.
5. Continue rotating and tightening.
I found this tool easy to use and it worked well for my project. Best part it was reasonably priced.
To learn how to make the garden dish flowers
(Click the image below to watch the YouTube video)
To purchase this tool, click the affiliate link below. If you purchase supplies from our links, we get a small commission and you help us to keep making more videos and tutorials like this one. Thank you for your purchase!
Did you enjoy this project? Please share it with your friends using the sharing buttons.
Follow our site using the follow buttons below to find out about
other fun projects.
Subscribe To our YouTube channel
because we publish New crafting videos On regularly.
Find us On:
If you have any questions about this project, you can post them as comments on the Youtube Video above or through our "Contact Us" page.